Thursday, May 16, 2013


Ropes and milk crates and sidewalks and neighbors and electrical cords out front window from 3rd floor. West Village 2000 and my 1967 triumph.

Wednesday, May 1, 2013

Saturday, March 30, 2013

John's new Chevy, I start rear fender

One of my friends takes delivery of his new truck.
Along with Jeffrey Schad, John and I share the garage in brooklyn.

John Copeland paints

and he co-produces The Brooklyn Invitational
with Jeff and Keino.

Thursday, March 21, 2013

Aluminum fenders for 62 triumph

Started with the front one to freshen my memory. 

Lots of metal finishing to do before I can polish it.

Shortened seat pan.

Tig brazing sheet metal with silicon bronze is enjoyable. Less heat and not fusing the metals equals less warping. The slice shows how much shorter the new tail section is. I started with a frame that had been cut.

Sunday, March 17, 2013

1962 Triumph tank mounts

Not stock but fits a stock tank. Originals were cut off.

Thursday, March 14, 2013

ARD Magneto cover (151017808019))

Original ARD cover. It appears it was sealed on pretty well judging from some hammer marks I'm guessing were needed to remove it. I polished it up some.

A bit of gasket cement still there. Surfaces are smooth though.

No guts. They can be found at a bearing supply house. And Joe Hunt sells a single fire magneto.

A few more things will soon be for sale as I prep them. The 1962 project is missing more than I thought .

Wednesday, February 13, 2013

Tuesday, February 12, 2013

Monday, February 11, 2013

Some pits to fill

After machining will do final finishing

PreUnit primary

Mike's got a nice belt drive so we are gonna make some vents. Filing down some welds before milling slots.

Friday, February 1, 2013

Wednesday, October 24, 2012

Beginning of a rack

For William's triumph

Wednesday, August 22, 2012

Going nowhere loudly.

Thursday, July 19, 2012


For Myles

Sunday, July 8, 2012

Thursday, June 28, 2012

Thursday, June 21, 2012

Wednesday, June 20, 2012

Tuesday, May 22, 2012

Part 1

Remove tab, including weld and epoxy weld. Find hole, both existing and ones I just created. Then weld up while wearing respirator because of funky brown smoke. Ha